Service Repair, Maintenance And Spare Parts - Bosch Rexroth MS2N Operating Instructions Manual

88/101
Maintenance and repair

8.2 Service repair, maintenance and spare parts

Wearing parts are reliably and professionally repaired and replaced by the Bosch
Rexroth Service in shopfloor-oriented quality.
The service lives of motor components, such as seals and bearings, may vary de-
pending on the operating conditions, such as operation mode, speed, vibration
and shock load, and frequent reverse mode.
We recommend to change the bearing after 30,000 operating hours. Shorter re-
placement intervals may be necessary; cf. checks during operation
"Operation" on page
We recommend regular visual inspections on shaft sealing rings. Depending on
operating conditions, signs of wear may appear after 5,000 operating hours. If
necessary, replace the shaft sealing rings.
We recommend to have these repairs made by Bosch Rexroth Serv-
ice.
The Bosch Rexroth service helpdesk at our headquarters in Lohr, Germany and
our worldwide service provide You can contact us 24/7.
Phone: -49 (0) 9352 40 50 60
Fax -49 (0) 9352 18 49 41
Email: service.svc@boschrexroth.de
Internet: http://www.boschrexroth.com
Preparing information
For quick and efficient help, please have the following information ready:
Detailed description of the fault and the circumstances
●
Information on the rating plate of the products in question, particularly type
●
codes and serial numbers
Your contact data (phone number, fax number, e-mail address)
●
Bosch Rexroth AG R911347581_Edition 04
84.
MS2N Synchronous Servomotors
chapter 7.2