MS2N Synchronous Servomotors
6.2.12 Terminal boxes
WARNING
Follow the general installation and safety regulations when working on power
●
installations.
Before start-up, connect the protective conductors on all electric components
●
according to the connection plan.
Install the covers and guards provided for this purpose before switching on.
●
Lock all openings of the terminal box with dummy plugs and close the termi-
nal box with the intended terminal box lid.
Never touch electrical connection points of the components while power is
●
turned on.
Observe when connecting the terminal box:
Connect or disconnect clamp connections only in de-energized, dry and clean
●
state.
Connect the motor to reade-made connection cables.
●
Remove sScrew-type blank cap "X" at the cable entry side.
●
Select and tighten the cable gland according to the manufacturer´s details
●
about cable diameters.
The connections must be established such that a permanent safe electrical
●
connection is ensured.
Establish a safe protective conductor connection.
●
After connecting, lock all openings.
●
Danger to life by high electric voltage!
R911347581_Edition 04 Bosch Rexroth AG
73/101
Assembly