About This Product; Safety Instructions On The Product - Bosch Rexroth MS2N Operating Instructions Manual

MS2N Synchronous Servomotors

4 About this product

4.1 Safety instructions on the product

Please note the safety and prohibitive sign on the motor. The sign significance is
explained in the following.
Safety sign
Tab. 4-1: Safety sign on the product
Significance
Hot surfaces with temperatures over 60 °C may cause burns
Let the motors cool down before working on the motors or in close proximity
to the motors. The thermal time constant stated in the technical data is a
measure for the cooling time. Cooling down can require up to 140 minutes.
- Wear safety gloves.
- Do not work on hot surfaces.
Warning against dangerous electric voltage
Electric connection may only be established by specialized staff. Tools for
electricians (VDE tools) are absolutely necessary.
The installation has to be switched de-energized before operation and de-
energization must be ensured via a suitable measuring device. De-energize
the machine and secure the mains switch again unintendet or unauthorized
re-energization.
- Open the terminal boxes only in switched-off voltage.
Motor damage due to strikes onto the motor shaft
Do not strike the shaft end and do not exceed the allowed axial and radial
forces of the motor.
About this product
R911347581_Edition 04 Bosch Rexroth AG
9/101