Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
If IPv6 is in use, OSPFv3 is used automatically.
Note: When the 9500 MPR is used with other equipment, the OSPF interface parameters
of the equipment must be the same as those of the related TMN interface on the 9500 MPR.
The 9500 MPR OSPF parameters are:
• Priority: 1
• Retransmit Interval: 5 sec
• Hello Interval: 10 sec
• Dead Interval: 40 sec
• Poll Interval: 120 sec
• Maximum MTU: 1500 (Broadcast), 1492 (PointToPoint)
• Hello Interval: 10 seconds
• Router Dead Interval: 40 seconds
• Retransmit Interval: 5 seconds
• Interface Transit Delay: 1 second
• MTU: 1500 bytes
Administer network configuration
131