Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
To provision Hold off timer for Core Ethernet ports in a Ring
1. To provision Hold off timer for Core Ethernet ports in a Ring
Note: The Hold Off parameter is supported by optical Ethernet ports configured on the Core
card that are part of a Ring. The timer is fixed to 500 ms.
Figure 242
Provision the Hold Off parameter
a
b
c
f. Provision Synch-E role, select Synch-E Master or Synch-E Slave.
g. Provision SSM reception and transmission, select enabled (checked) or
disabled (unchecked).
h. Click on the Apply button.
Provision the Hold Off timer parameter using the following procedure. See
Figure
242.
a. Select Ethernet Port#n to provision (Ethernet Port #5/#6).
b. Select Settings tab.
c. Select Hold Off Enabled: enabled (checked) or disabled (unchecked).
Provision Ethernet ports
d
417