Figure 670 1+1 Configuration With Mptacc Units - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
Use the Provisioning Tool
3. Configure the protection if needed:
4. After the selection click on the ADD button. The screen shown in
Figure 670 1+1 configuration with MPTACC units
5. For the 1+1 configuration the ports must be both electrical or optical (no mixed
896
In the MPT Protection Configuration area select the Main port and the MPT
Spare port (in the example of the following figure s5p1 means Slot #5 Port #1)
and in the Port Type field select the protection configuration: 1+1 HSB or 1+1
FD.
appear.
configuration is allowed). The 1+1 configuration can be set up with two ports on
the same unit or on two different units.
WebEML User Manual
Figure 670 will