Release 7.0.0 3DB 19286 ACAA Issue 01
Perform Tx Diversity Antenna operations
1. Select a radio direction in the Available MPT-HLC 1+1 HSB panel.
2. Click Force Main. A confirmation message is displayed; see
Figure 785
Tx Diversity: Force Main
To force transmission to the diversity antenna
1. Select a radio direction in the Available MPT-HLC 1+1 HSB panel.
2. Click Force Diversity. A confirmation message is displayed; see
To clear forced transmission
1. Select a radio direction in the Available MPT-HLC 1+1 HSB panel.
2. Click Clear Force. A confirmation message is displayed; see
1074
If TDA is disabled, an error message is displayed: Error: cannot apply command.
If TDA is disabled, an error message is displayed: Error: cannot apply command.
If the antenna RF switch is not detected prior to the command, switching is
blocked and the TDA status continues to show the main antenna as active.
WebEML User Manual
Figure
785.
Figure
785.
Figure
786.