Water Inlet And Drainage - Miele PG 8063 Operating Instructions Manual

Problem
The cleaning result is un-
satisfactory.

Water inlet and drainage

Problem
Check water inlet
Cause and remedy
Load carriers were not suitable for the load items.
Select load carriers which are suitable for the task.

The load carriers were loaded incorrectly or overloaded.
Arrange the load items correctly. Follow the instructions

given in the operating instructions.
Avoid overloading the load carriers.

The reprocessing programme was not suitable for the soil-
ing.
Select a suitable programme.

Or:
Adjust the parameters to suit the task.

Soiling has been left to dry on the load items for too long.
Soiling should not be left on the load items for more than

6 hours before machine reprocessing.
A spray arm is blocked.
Ensure the spray arms are not obstructed when arran-

ging the load items.
Nozzles on the spray arms are blocked.
Check the nozzles and clean them as necessary.

The filters in the wash cabinet are dirty.
Check the filters and clean them if necessary.

The upper basket was not correctly mounted on the water
connection.
Check the adapter.

Cause and remedy
One or more stopcocks are closed.
Open the stopcocks.

There was insufficient water in the machine.
Clean the water intake filters.

Open the stopcocks fully.

The supply pressure at the water connection is too low.
Refer to the specifications for supply pressure in the

"Technical data".
Contact a suitably qualified installer.

Problem solving guide
107