Table of Contents
Advertisement
Refill indicator
Dispensing
rinsing agent
Adding and dispensing chemical agents
Add rinsing agent only until it is up to the "max." mark on the edge
of the funnel.
Close the container.
Wipe up any spilled rinsing agent. This prevents over-foaming oc-
curring during the next programme.
When the fill level is low in the (DOS 2) supply container for rinsing
agent you are reminded to refill it.
Confirm the message shown with OK and
refill the rinsing agent as described.
For adjusting the dispensing concentration, see "Further settings/Dis-
pensing systems".
If spots appear on load items after reprocessing:
Select a higher setting
If clouding or smearing appears on load items after reprocessing:
Select a lower setting.
Refill rinsing agent
51
- Quick Links:
- Machine Overview
Hide quick links:
Advertisement
Table of Contents
