Table of Contents
Advertisement
EN
1.3. General safety instructions
NOTE
Installation and operating manual
Before reading this manual, make sure that it refers to your device model. This document
contains important information and instructions for the safe operation of the device. Before
carrying out any work with or on the device, all specialist technical personnel ¹ must have
read this manual.
A copy of this installation and operating manual must be kept near the device where it is at
all times accessible to staff.
In addition to the instructions in this document, always comply with the statutory regulations
for machine operation, accident prevention and safety. This also applies to the use of
accessories and spare parts.
DANGER
Insufficient qualification
Improper handling and operation of the device can result in serious or even fatal injury, and/
or damage to property.
•
•
Specialist technical personnel
1
Specialist technical personnel are persons who, due to their professional qualification and knowledge in the field
of measuring, control and pneumatic technology, and their knowledge of the applicable statutory regulations,
guidelines and standards are in a position to foresee potential dangers in relation to the use of the device and who
are qualified to perform the tasks described in this manual. Special operating conditions (e.g. aggressive media)
require additional knowledge.
DANGER
Operation of device outside limit range
If the specified limits are exceeded, there is a risk of device malfunction, potentially resulting
in injury and damage to materials.
•
METPOINT
UD01
®
All tasks described in this installation and operating manual must be performed by
specialist technical personnel
Before carrying out any work with or on the device, all specialist technical personnel¹
must have read and understood the contents of this installation and operating manual.
It is the responsibility of the owner of the device to ensure that the above requirement is
complied with.
The device must only be operated for the intended purpose and within the permissible
limits specified on the type plate and in the technical data.
who meet the following criteria:
1
Installation and operating manual
5
Advertisement
Table of Contents
