LG niagara4 MultiSITE Edge 10 User Manual page 66

Step 9 When finished making platform changes from the system shell, do the following:
If no changes, or reboot is not necessary, simply type L to Logout.
•
If changes require rebooting, select the Reboot option.
•
Type "y" at the "Are you sure you want to reboot [y/n]" prompt, and press Enter. Shutdown-related text appears in the terminal
(PuTTY) window.
Step 10 Click the Close control (upper right corner) in the terminal session (PuTTY) window.
Click OK in the "PuTTY Exit Confirmation" popup dialog.
Step 11 Unplug the USB connector from the MS-E10 device's Debug port.
About the system shell menu
The system shell of the MS-E10 device provides simple, menu-driven, text-prompt access to basic Niagara platform settings,
including IP network settings, platform credentials, system time, and enabling/disabling SFTP/SSH and Telnet. Also, you can use
it to perform a TCP/IP "ping" from the MS-E10 device to another host.
Changes issued in the system shell become immediately effective, except for IP address settings (Update Network Settings).
You must reboot the MS-E10 device in order for any changed network settings to become effective.
Note:
If SSH is enabled in the MS-E10 device, you can also access the controller's system shell using a remote terminal
•
session using SSH. Platform login is still required (just as with the device powered up in serial shell mode).
Be careful when changing items from the system shell, in particular platform account (login credentials,
•
system passphrase) and network settings. If you change platform login credentials and then lose or forget
them, you can restore the "factory default" platform login credentials—however, you will need to make a
debug system shell connection, reboot the MS-E10 device, and then be careful to press a key at the
appropriate time during boot up process.
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
MS- E10 User Guide
66