Quick Reference Guide For Implementing A Safety System - ABB +Q951 Original User Manual

Quick reference guide for implementing a safety system

Task

Select the appropriate functional safety standard for the implementation: EN ISO 13849-1,
EN/IEC 62061, IEC 61511 or other
 If you select EN/IEC 62061 or IEC 61511, make a safety plan. See EN/IEC 62061.

Assess safety: analyze and evaluate risks (estimate SIL/PL) and define risk reduction
strategies.
Define the safety requirements

Design the safety system. The part of the design made by ABB is described in chapter
Option description and instructions

If you made any changes to the delivered safety system, verify the achieved SIL/PL with, for
example, FSDT-01 Functional safety design tool or similar. See
user's manual

Connect the wiring. See section

Set the parameters. See section
 Validate that the implemented system meets the safety requirements:
−
Do the acceptance test. See section
 Write the necessary documentation.
on page 8.
(3AXD10000102417 [English]).
Wiring
Parameter settings
3ADW000508R0201+Q964 E-Stop cat.1 without opening mains contactor en b
on page 14.
on page 11.
Start-up and acceptance test
Functional safety design tool
on page 15
Introduction to the manual
7