Advertisement
Quick Links
Please read instructions from start to finish
before you start your refill.
INSTRUCTIONS FOR REFILLING BROTHER TN 2310 / 2320 (EUROPE)
Compatible with: DCP-L2500D, DCP-L2520D, DCP-L2520DW, DCP-L2540DN, DCP-L2540DW, DCP-L2560DW,
HL-L2300D, HL-L2305W, HL-L2320D, HL-L2340DW, HL-L2360DN, HL-L2360DW, HL-L2365DW, HL-L2380DW,
MFC-L2700D, MFC-L2700DW, MFC-L2703DW, MFC-L2720DW, MFC-L2740DW
There are two different toner cartridges available for these machines: the TN2310 is rated for 1,200 pages,
and the TN2320 is rated for 2,600 pages. The drum unit, which will be covered in separate instructions, is
.
rated for 12,000 pages. There are different part numbers for these cartridges depending on your region
When to refill? Toner Low? Replace toner? Or when you decide?
The printer asks for the toner cartridge to be changed before all of the toner has been used. This is a
waste of toner and your money. Do not change or refill the cartridge until you are ready.
When the printer tells you to change the cartridge you can put the printer into "Continue Mode" – this will
force the printer to use up all of the remaining toner in cartridge!
How you reset the printer using "continue mode" will depend on which printer version you have. Details
below.
Resetting Multifunction Printers (continue mode)
DCP / MFC Series:
The Replace Toner message is displayed on the LCD or in the Status Monitor when Brother thinks you should
change the toner cartridge.
Follow the instructions below to turn on continue mode.
Print until the print quality is no longer acceptable or you cannot print. Then follow the refill
instructions.
© Zinetic.co.uk. All Rights Reserved
Advertisement
Related Manuals for Brother TN 2310
Summary of Contents for Brother TN 2310
- Page 1 Resetting Multifunction Printers (continue mode) DCP / MFC Series: The Replace Toner message is displayed on the LCD or in the Status Monitor when Brother thinks you should change the toner cartridge. Follow the instructions below to turn on continue mode.
- Page 2 Resetting HL SERIES (continue mode) Your Brother printer will let you know when you are low on toner using an LED lights and or a replace toner message on your computer. The printer asks for the toner cartridge to be changed before all of the toner has been used.
- Page 3 Please read instructions from start to finish before you start your refill. Refilling the Cartridge When the print starts to physically fade from your printsor you decide you want to refill follow the instructions below. Remove cartridge and drum from printer. Separate the cartridge from the drum unit.
- Page 4 Please read instructions from start to finish before you start your refill. 4. Carefully remove the plastic end cover. This will reveal the gears and the refill cap. If you have the starter cartridge – you will be missing the reset gear. 5.
- Page 5 Please read instructions from start to finish before you start your refill. Removing the fill plug from the toner cartridge. 7 The fill plug is an awkward shape and needs to be removed carefully. a. Carefully pry it up from all sides b.
- Page 6 Please read instructions from start to finish before you start your refill. 8 WARNING: You must ensure all toner is dumped from your cartridge before refilling with Empty in an area the new toner. You must do this every refill. that can tolerate a toner spill i.e.
- Page 7 Please read instructions from start to finish before you start your refill. 14 Replace the plug in your toner cartridge with the new cap. Make sure the plug is fitted securely so that no toner can escape. If you damage the plug we sell replacements with the reset gear.
- Page 8 Please read instructions from start to finish before you start your refill. 17 Replace the plastic cover and secure with 2 screws. Safety information: Toner powder should be treated as a nuisance dust. Not to be used by children. Avoid inhalation.