Download
Share
Print this page
Brother TN410 Cartridge Remanufacturing Instructions
  1. Manuals
  2. Brands
  3. Brother Manuals
  4. Printer Accessories
  5. TN410
  6. Cartridge remanufacturing instructions

Brother TN410 Cartridge Remanufacturing Instructions

Toner
Hide thumbs

Advertisement

Quick Links

Download this manual
BROTHER
HL-2130 • TN410
®
TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
BROTHER TN410 TONER CARTRIDGE
www.uninetimaging.com
© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com

Advertisement

loading

Related Manuals for Brother TN410

Summary of Contents for Brother TN410

  • Page 1 HL-2130 • TN410 ® TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS BROTHER TN410 TONER CARTRIDGE www.uninetimaging.com © 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com...
  • Page 2 TN450 cartridges, and vice versa; nor does the HL-2240/2270, or the TN410. The TN410, that is of concern here, comes out of the box with a printer yield of 700 pages, and requires modification in order to be remanufactured and put to use once again. Brother's new TN410 replacement cartridge (1,000 pages) includes a flag gear system (or reset gear) in order to reset the counter and refresh the machine to print again, unlike the starter cartridge.
  • Page 3 50,000-page duty cycle; basically, when these parts wear out, so does the printer. There is a reset gear that resets the machine’s counters every time a new toner cartridge is installed. In order utilize the TN410 starter cartridge again, a special gear (called a flag gear) must be installed, and the left side must also be replaced with one that shows three actuator flags on it.

  • Page 4: Required Tools

    BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS Flag gear, spring, and end cap shown for TN410 and TN420 CARTRIDGE PRINT THEORY Basic printing theory is further explained in our Brother TN420/450 toner, and DR420 OPC drum cartridge remanufacturing instructions. REQUIRED TOOLS 1.
  • Page 5 BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 1. Vacuum the exterior of the cartridge. Remove the fill plug from the toner cartridge. Dump of the remaining toner and vacuum/blow out the cartridge. 2. Remove the two screws on the non-gear side of the developer roller.
  • Page 6 BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 3. Remove the drum axle plate, lifting it up by the two tabs as indicated. Lift the plate and take it out. 4. On the gear side, remove the two screws and cover plate.
  • Page 7 BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 5. The reset gear is spring-loaded and must be positioned correctly for the printer to accept a new cartridge. The starter cartridge does not have a reset gear and the end cap blocked us from adding a new one.
  • Page 8 BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 7. Remove the "E" ring. 8. Remove all of the remaining gears. Do not lose the reset gear spring! www.uninetimaging.com © 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
  • Page 9 BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 9. On the gear side of the developer roller, press in on the locking tab, and rotate the developer roller lock up, to release it. 10. Remove the developer roller. www.uninetimaging.com © 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
  • Page 10 BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 11. Remove the doctor blade screws and the doctor blade. Unlike previous TN cartridges, the doctor blade is not physically attached to the seals, so it can be removed for cleaning. 12. Completely remove all remaining toner from the toner hopper, the foam feed-roller, and the doctor blade foam seals.
  • Page 11 Install the blade and two screws. 15. Clean the developer roller with a lint-free cloth and a dedicated developer roller cleaner for use on Brother rollers. Do not use any chemicals other than a dedicated Brother roller cleaner. Reinstall the developer roller (long shaft side to the gear side), with the white lock pointing up.
  • Page 12 BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 16. Install the non-gear side axle plate. Make sure the tabs lock in place. 17. Clean the gears, making sure they have no toner on them. This is a good time to also check the gear shafts to make sure there is enough grease.
  • Page 13 BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 18. Set the reset gear spring as shown. Ensure that the actuator gear is in the proper position as shown (right photo). 19. Set the reset gear as shown. www.uninetimaging.com © 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
  • Page 14 20. Install the gear cover plate as shown in the photo. Make sure the black arrow on the cover is aligned with the white arrow marked #3. This applies both to the TN410 and the TN420 cartridges. This is not the case for the TN450, which has different gears.
  • Page 15 BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 21. On non-gear side, install the plastic arms and their corresponding screws. The smaller arm is installed last, and must be turned from the bottom up, so that the lock engages. 22. Fill the cartridge with the proper gram load of black 23.
  • Page 16 BROTHER HL-2130 • TN410 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 24. Install the developer roller cover. REPETITIVE DEFECT CHART OPC drum: 94.2 mm Upper fuser roller: 53.4 mm Lower pressure roller: 78.5 mm Developer roller: 32.5 mm NOTE: If you are experiencing horizontal black streaks and changing cartridges does not help, look to the bottom of the paper tray.