Outdoor Walk-In Plan Dimensions - Siemens WL Series Instruction & Installation Manual

Type WL Low Voltage Metal-Enclosed Switchgear
Installation
Outdoor Walk-in Floor Plan
60" is representative for a 60" deep switchgear internal structure. For other
internal structure depths (65 or 75) add extra depth to 60" that is shown.
103.8" is representative for a 60" deep internal structure. For other internal
structure depths (65 or 75) add extra depth to 103.8" that is shown.
Outdoor Walk-in Side View
Dimensions shown in inches (mm)
110.7 dimension is based on 60" internal frame structure and if a deeper
internal frame structure is used (65 or 75) the extra depth should be added
to the 110.7 dimension.
103.8 dimension is based on 60" internal frame structure and if a deeper
internal frame structure is used (65 or 75) the extra depth should be added
to the 103.8 dimension.
Figure 12. Typical Outdoor Walk-in Floor Plan and Side View
14
Courtesy of NationalSwitchgear.com
Overall Width
Refer to appropriate indoor plan view for available customer conduit
information.
60.43 dimension is based on 60" internal frame structure and if a deeper
internal frame structure is used (65 or 75) the extra depth should be
added to the 60.43 dimension.
102.2 dimension is based on 60" internal frame structure and if a deeper
internal frame structure is used (65 or 75) the extra depth should be
.
added to the 102.2 dimension