Page 1
INSTRUCTION MANUAL These document are designed for purchaser of our machines only and may neither be reproduced nor made know to third party without written approval Robert Bosch Limited Packaging Technology, Business Unit Confectionary and Food 700/154 Moo 1 Amatanakorn Industrial Estate Tambon Baankao, Amphur Panthong, Chonburi 20160 Thailand.
Pack201 | Preface | Section 1 EN | 3 1 Preface 1.1.3 Disclaimer Bosch, in good faith, is providing information of a 1.1 General Information technical nature, and details of the product and its To all personnel who will be operating, servicing or use�...
1 Model: This is the machine model� 2 Machine serial number: This is the number under which the machine data are stored at Bosch� 3 Wiring Diagram: The electrical schematic for the machine� 4 Largest Motor Amps�: This is the maximum amount of amps the drive motor will draw�...
Remove the wrapper from the shipping crate and the crossbars� check it carefully for any damage� If damaged, notify the carrier immediately to file a claim. Contact Bosch If the Infeed conveyor was detached for shipping or for further instructions if the damage is extensive�...
Page 22
If the wrapper is not operating properly, consult the following problem descriptions, their associated causes), and solutions� If you are having a problem that is not listed here, contact Bosch for additional information and/or service� Problem: The wrapper does not run.
Page 23
Faulty solid state relay� Using the electrical schematics, have a qualified electrician check it out and/or consult Bosch� The crimper collector ring assembly is faulty� Have a qualified electrician check the collector rings and brushes and replace if necessary�...
Page 25
Bosch for further assistance� The finwheel caps are worn Call Bosch to order new finwheel caps. The parent roll is bad Call Bosch to order a new parent roll� Problem: The film comes out from between the finwheels. Possible Cause Solution The finwheels are open Move the finwheel switch to the closed position.
Page 103
When lubrication is necessary, use the the wrapper. following lubricants: 1. Use a food-grade grease to lubricate • Copa-Slip, Bosch P/N-119002 (Use this the gears for the finwheels and cutting anti-seize compound for all fasteners head. on the finwheels, auxiliary finwheels, 2.