Toro Super Recycler 115-8416 Installation Instructions Manual

Mulch Plug Lock Kit
21in Super Recycler
Model No. 115-8416
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
1
Installing the Mulch Plug Lock
Parts needed for this procedure:
1 Lock
Procedure
Remove and discard the spring tab on the mulch plug,
and install the lock as shown in Figure 1.
Figure 1
1. Mulch plug
2. Screw
© 2008—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Description
Lock
No parts required
3. Spring tab
4. Lock
Register at www.Toro.com.
® Walk-Behind Lawn Mower
Qty.
1
–
2
Using the Mulch Plug Lock
No Parts Required
Procedure
1. Rotate the lock counterclockwise on the mulch plug
to the unlocked position (Figure 2).
1. Lock
2. Lift the rear door.
3. Insert the mulch plug into the opening at the rear of
the mower housing until it snaps into place.
4. Rotate the lever lock clockwise into the locked
position (Figure 3).
Form No. 3360-532 Rev A
Installation Instructions
Use
Install the lock.
Use the mulch plug lock.
Figure 2
Original Instructions (EN)
Printed in the USA
All Rights Reserved