Auto Power Off; Troubleshooting; Nothing Is Indicated On The Display; Lo" Is Indicated On The Display And The Bathroom Scales Switch Off - Silvercrest SPWC 180 B1 Operating Instructions And Safety Instructions

SilverCrest SPWC 180 B1

7.2 Auto Power Off

The bathroom scales have an automatic switch-off function (Auto Power Off function).

The bathroom scales switch off automatically about 10 seconds after you step off the tread (2).

If you do not step off the tread (2) after weighing yourself, the bathroom scales also switch off
automatically after approximately 10 seconds.

8. Troubleshooting

8.1 Nothing is indicated on the display


The batteries are empty. Replace them with new batteries of the same type. Please note the
instructions in section 6.1 "Inserting / changing the batteries".

The batteries are inserted incorrectly. Please note the instructions in section 6.1 "Inserting /
changing the batteries".
8.2 "Lo" is indicated on the display and the bathroom scales
switch off

The batteries are almost empty. Replace them with new batteries of the same type. Please
note the instructions in section 6.1 "Inserting / changing the batteries".
8.3 The bathroom scales switch off while you are weighing
yourself

An error has occurred and the bathroom scales cannot measure your weight. In this case,
step off the tread (2) of the bathroom scales and step on it again. The weight measurement
starts again.

8.4 "Err" is indicated on the display


An error has occurred. In this case, step off the tread (2) of the bathroom scales and step on
it again. The weight measurement starts again.

An error has occurred. Please remove the batteries briefly and put them back in again. Please
note the instructions in section 6.1 "Inserting / changing the batteries".

8.5 "0-Ld" is indicated on the display


Your weight exceeds the maximum load capacity of 180kg / 396lb. You should step off the
tread (2) of the bathroom scales immediately to avoid damaging the scales.
10 - English