REAR BUMPER COVER
REAR BUMPER COVER REMOVAL
1. Open the rear storage lid and remove the rear rack.
2. Disconnect the tail lights from the main wiring
harness.
3. Remove the tail lights.
4. Remove the screws retaining the rear bumper cover.
REAR BUMPER COVER INSTALLATION
1. align the rear bumper cover with the mounting holes
and loosely install the fasteners
2. Toque to specification.
TORQUE
Until Fully Seated
3. Install the tail lights.
4. Connect the tail lights to the main wiring harness.
5. align the rack with the mounting holes and loosely
install fasteners.
6. Torque to specification.
TORQUE
Until Fully Seated
BODY / FRAME
q
.
10
10.15