Connector Description - Pioneer PRA-BD11 Operating Instructions Manual

Hide thumbs Also See for PRA-BD11:
Table of Contents

Advertisement

Available languages

Available languages

Connector Description

[PRA-BD11]
1 SDI input connector
Input connector for SDI signals.
Connect to an SDI output connector on
an industrial VTR or other equipment.
Note that embedded audio does not
support input of compressed audio.
2 AES/EBU input connector
Input connector for AES/EBU signals.
Connect to an AES/EBU output connector
on an industrial VTR or other equipment.
This interface does not support the CP-
1201 consumer format and compressed
audio input.
Input only AES/EBU signals synchronized
with the selected video signal to the DVD
Recorder.
3 DC IN connector
PRA-BD11 power connector.
Use the 4-pin cable (M) furnished with
the PRA-BD11 to connect this connector
to the designated connector inside the
DVD recorder.
4 26-pin connector
This connector transmits signals between
the PRA-BD11 and the DVD recorder.
Use the FFC cable (M) furnished with the
PRA-BD11 to connect this connector to
the designated connector inside the DVD
recorder.
5 30-pin connector
This connector transmits signals between
the PRA-BD11 and the the DVD recorder.
Use the FFC cable (L) furnished with the
PRA-BD11 to connect this connector to
the designated connector inside the DVD
recorder.
[PRA-BD12]
1 SDI output connector
Output connector for SDI signals.
Connect to an SDI input connector on an
industrial VTR or other equipment.
Note that embedded audio does not
support output of compressed audio.
2 AES/EBU output connector
Output connector for AES/EBU signals.
Connect to an AES/EBU input connector
on an industrial VTR or other equipment.
This interface does not support the CP-
1201 consumer format and compressed
audio output.
3 DC IN connector
PRA-BD12 power connector.
Use the 4-pin cable (L) furnished with the
PRA-BD12 to connect this connector to
the designated connector inside the DVD
recorder.
4 30-pin connector
This connector transmits signals between
the PRA-BD12 and the the DVD recorder.
Use the FFC cable (L) furnished with the
PRA-BD12 to connect this connector to
the designated connector inside the DVD
recorder.
7
PRA-BD11 / PRA-BD12
En

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pra-bd12

Table of Contents