Replacement Fan Kit Assemblies; Fan Replacement - Motorola OM 2000 Installation & Operation Manual

APPENDIX D — FAN FIELD REPLACEMENT PROCEDURE
Figure D-1 — Fan removal/replacement

Replacement Fan Kit Assemblies

The Motorola part number for an OM replacement fan kit assembly (one fan) is
492898-002.

Fan Replacement

To install a fan:
1. Rotate the fan motor so the cable is properly aligned with the connector and
slide it onto the four stand-offs. The fan blades should face toward the OM; the
rear of the fan motor should face away from the OM.
2. Connect the fan power cable to the connector.
3. Slide the fan cover over the body. The four stand-offs should pass through holes
on the fan cover.
4. Secure the fan cover in place with the four washers and hex nuts.
5. Ensure the replacement fan blade is turning. The front panel STATUS LED should
not be solid red.
62