■ Connecting BGM Adapter
Connect the BGM Adapter and the MCU Board, referring to "Figure 4 Connection of BGM Adapt-
er". The BGM Adapter and the MCU Board have an index mark (for pin 1) on its connectors. Align
the index mark on both sides.
Plug a USB cable into the BGM Adapter (the cable is bundled with the BGM Adapter).
Make sure that POWER-SW on the Evaluation Board is set to OFF (to the side of "
ging the cable.
Plug into BGM Adapter
USB cable
(Bundled with BGM Adapter)
6
BGM Adapter
Figure 4 Connection of BGM adapter
Evaluation Board
MCU Board
Index mark
Power-SW
") before plug-
JP1
JP2