Table of Contents
Advertisement
5
Installing Cables
•
Ensure that the upstream AC input circuit breaker is OFF, and that the warning label "Do
not operate" is attached.
•
Switch off all circuit breakers before installing the power cable.
5.1
Installing a PV Input Power Cable
1. Connect the DC input power cable between the solar junction box (SJB) and the cabinet
(using one PV input as an example).
2. Cover a PVC corrugated pipe over the cable part outside the cabinet and secure the PVC
corrugated pipe to the cable hole.
5.2
Installing an AC Input Power Cable
1. Install an AC input power cable.
2. Cover a PVC corrugated pipe over the cable part outside the cabinet and secure the PVC
corrugated pipe to the cable hole.
Single ICC cabinet
(1) DG
10
In a parallel system, the
length and model of the
cable between the cabinet
and the DGs must be the
same.
Advertisement
Table of Contents
