Table of Contents
Advertisement
4
Installing ESMs
1. Before installing batteries, carefully read the battery safety precautions.
2. Wear insulation gloves and use insulated tools during installation.
3. Place the batteries in a correct way to prevent vibrations and shocks.
1. Remove filler panels from the cabinet based on the actual number of ESMs.
2. To facilitate battery installation, install the auxiliary support on the cabinet first.
3. Install ESMs.
The address of the ESM above the BCU in the right cabinet must be always 1 (the first ESM
displayed on the SBCU), and the address of the ESM at the bottom layer in the left cabinet must
always be the last value (the last ESM displayed on the SBCU). If a cabinet is not fully configured,
the vacant slots are always on the top of the cabinet and covered by filler panels.
Place ESMs from bottom to top and from left to right. To prevent falling over due to overweight,
ensure that the cumulative height of ESMs in the right cabinet is one ESM greater than or
equal to the cumulative height of ESMs in the left cabinet.
(1) ESM layout (even number)
(2) ESM layout (odd number)
8
Advertisement
Table of Contents
