Panasonic SA-AKX18PH Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Stereo System
  5. SA-AKX18PH
  6. Service manual
Panasonic SA-AKX18PH Service Manual

Panasonic SA-AKX18PH Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Please refer to the original service manual for:
CD Mechanism Unit (BRS12C) , Order No. PSG1303059AE
Speaker system SB-AKX18PN-K, Order No. PSG1401008CE

TABLE OF CONTENTS

1 Safety Precautions----------------------------------------------- 3
1.1. General Guidelines---------------------------------------- 3
1.2. Before Use (For PH only)-------------------------------- 4
1.3. Before Repair and Adjustment ------------------------- 4
1.4. Protection Circuitry ---------------------------------------- 4
1.5. Power Supply using SMPS ----------------------------- 5
1.6. Safety Parts Information --------------------------------- 6
2 Warning -------------------------------------------------------------- 7
2.2. Precaution of Laser Diode------------------------------- 7
(PbF)---------------------------------------------------------- 8
Model No.
Product Color: (K)...Black Type
PAGE
3 Service Navigation --------------------------------------------- 10
3.1. Service Information -------------------------------------- 10
4 Specifications ---------------------------------------------------- 11
5.2. Main Unit Key Button Operation---------------------- 12
6 Service Mode ----------------------------------------------------- 13
6.1. Cold-Start -------------------------------------------------- 13
6.3. Doctor Mode Table--------------------------------------- 14
6.4. Self-Diagnostic Mode ----------------------------------- 17
7 Troubleshooting Guide --------------------------------------- 18
© Panasonic Corporation 2013. All rights reserved.
Unauthorized copying and distribution is a violation
of law.
CD Stereo System
SA-AKX18PH
SA-AKX18PN
electrostatic
PSG1401007CE
PAGE
breakdown

Advertisement

Table of Contents
loading

Related Manuals for Panasonic SA-AKX18PH

Summary of Contents for Panasonic SA-AKX18PH

  • Page 1: Table Of Contents

    6.4. Self-Diagnostic Mode ----------------------------------- 17 2.4. Handling Precautions for Traverse Unit-------------- 8 6.5. Self-Diagnostic Error Code Table -------------------- 17 7 Troubleshooting Guide --------------------------------------- 18 © Panasonic Corporation 2013. All rights reserved. Unauthorized copying and distribution is a violation of law.
  • Page 2 7.1. No Power or No Display -------------------------------- 18 7.2. Bluetooth® Pairing Failure----------------------------- 18 7.3. No Key Function------------------------------------------ 18 7.4. No Remote Control Function -------------------------- 18 7.5. USB Device Cannot DetectPress -------------------- 19 7.6. No Output Sound----------------------------------------- 19 7.7. Check Point------------------------------------------------ 20 8 Disassembly and Assembly Instructions --------------- 21 8.1.

  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1. IMPORTANT SAFETY NOTICE There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Circuit Board Layout, Exploded Views and Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent X-RADIATION, shock, fire, or other hazards.

  • Page 4: Before Use (For Ph Only)

    1.2. Before Use (For PH only) Be sure to disconnect the mains cord before adjusting the voltage selector as shown in Figure 1-2. Use a minus(-) screwdriver to set the voltage selector (on the rear panel) to the voltage setting for the area in which the unit will be used.

  • Page 5: Power Supply Using Smps

    1.5. Power Supply using SMPS This model uses Switching Mode Power Supply (SMPS) to provide the power supply to the unit. Here is the supplied part no. for the SMPS Module 1) N0AB2GK00001 (For PN) 2) N0AD2GK00001 (For PH) Disconnect AC power to discharge the AC Capacitors (C1 (PH), C2) through a 10 , 10 W resistor to ground. 1.5.1.

  • Page 6: Safety Parts Information

    1.6. Safety Parts Information Safety Parts List: There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Exploded View & Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards.

  • Page 7: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensi- tive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD).

  • Page 8: General Description About Lead Free Solder (Pbf)

    2.3. General description about Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin (Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30 degrees C (86F) more than that of the normal solder.

  • Page 9: Grounding For Prevention

    ble cable, cut off the antistatic FPC. 2.5. Grounding for electrostatic breakdown prevention • As for parts that use optical pick-up (laser diode), the optical pick-up is destroyed by the static electricity of the working environ- ment. Repair in the working environment that is grounded. 2.5.1.

  • Page 10: Service Navigation

    3 Service Navigation 3.1. Service Information This service manual contains technical information which will allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service manual.

  • Page 11: Specifications

    Front Speakers: SB-AKX18PN-K Amplitude modulation (AM)  System: SC-AKX18PH-K Frequency range 522 kHz to 1629 kHz Main Unit: SA-AKX18PH-K (9 kHz step) (for PH) Front Speakers: SB-AKX18PN-K 520 kHz to 1630 kHz (10 kHz step) (for PH) 520 kHz to 1710 kHz...

  • Page 12: Location Of Controls And Components

    5 Location of Controls and Components 5.1. Remote Control Key Button Operation 5.2. Main Unit Key Button Operation...

  • Page 13: Service Mode

    6 Service Mode 6.1. Cold-Start Here is the procedure to carry out cold-start or initialize to shipping mode. 1. Unplug AC power cord 2. Press & hold [POWER] button 3. Plug AC power cord while [POWER] button being pressed FL Display will show “_ _ _ _ _ _ _ _” 4.

  • Page 14: Doctor Mode Table

    6.3. Doctor Mode Table 6.3.1. Doctor Mode Table 1 Item Key Operation FL Display Mode Name Description Front Key Doctor Mode To enter into Doctor Mode In CD Mode: 1. Press [ ] button on main unit follow by [4] and [7] on remote control.
  • Page 15 6.3.2. Doctor Mode Table 2 Item Key Operation FL Display Mode Name Description Front Key Volume Setting To check the volume setting of the In Doctor Mode: Check main unit. 1. Press [7], [8], [9] button on the remote control. Press [7]: VOL50 Volume Press [8]: VOL35...
  • Page 16 6.3.3. Doctor Mode Table 3 Item Key Operation FL Display Mode Name Description Front Key To display result of In Doctor Mode : Self- Adjustment self-adjustment for CD. 1. Press [10] [4] button Test on the remote control. Display of auto adjustment result Reference table: ERROR Code...

  • Page 17: Self-Diagnostic Mode

    6.4. Self-Diagnostic Mode Item Key Operation FL Display Mode Name Description Front Key Self Diagnostic To enter into self diagnostic checking Step 1: Select CD mode Mode (Ensure no disc is inserted). Step 2: Press & hold [g] button follow by [y/i] on main unit for 2 seconds.

  • Page 18: Troubleshooting Guide

    7 Troubleshooting Guide 7.1. No Power or No Display Caution: Check Secondary Cap. (C17) Press the Power Button Check Primary E-Cap (C2) 1. AC Cord Plug-out No Display on or Secondary Rect. Diode (D11) of Unit or Remote Control Measured 300V or more 2.

  • Page 19: Usb Device Cannot Detectpress

    7.5. USB Device Cannot DetectPress Press [ USB/CD] on the Set or Press the Power Button Plug-in USB Device to USB port Press Play Remote Control to No Problem of Unit or Remote Control with Red LED indicated FL Display Select USB A or B, Display Found to Turn ON the Unit...

  • Page 20: Check Point

    7.7. Check Point SMPS Module SMPS Module Fuse (F1) Pri. Cap (C2) Sec. Cap. C17 (0 ohm) (300V or more) (13V or 33V) Main PCB Main PCB IC1005_Pin 2 3.3V C1008/C1009 (6V) IC1004_Pin 3 1.6V CN2500_Pin 1- 3 5V/3.3V/12V CN2503 Pin #6 (USB-A) /Pin #7 (USB-B)

  • Page 21: Disassembly And Assembly Instructions

    8 Disassembly and Assembly Instructions • Illustration is based on SA-AKX18PH-K. • This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo- nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in this service manual) •...

  • Page 22: Main Components And P.c.b. Locations

    8.3. Main Components and P.C.B. Locations...

  • Page 23: Disassembly Of Top Cabinet

    8.4. Disassembly of Top Cabinet 8.5. Disassembly of Front Panel Step 1 Remove 4 screws. Unit Step 2 Remove 5 screws. • Refer to “Disassembly of Top Cabinet”. Step 3 Release both sides of Top Cabinet outwards as arrow shown. Step 1 Detach 8P Cable Wire at the connector (CN2502) on Main P.C.B..

  • Page 24: Disassembly Of Panel P.c.b. And Lcd P.c.b

    Step 4 Release tabs at bottom of unit. 8.6. Disassembly of Panel P.C.B. Step 5 Detach to remove Front Panel Unit and LCD P.C.B. • Refer to “Disassembly of Top Cabinet”. • Refer to “Disassembly of Front Panel Unit”. Step 1 Remove Volume Knob. Step 2 Remove Control Knob.

  • Page 25: Disassembly Of Usb P.c.b

    Step 5 Remove Panel P.C.B. and LCD P.C.B.. 8.8. Disassembly of Rear Panel. • Refer to “Disassembly of Top Cabinet”. Step 1 Remove 9 screws. 8.7. Disassembly of USB P.C.B. • Refer to “Disassembly of Top Cabinet”. Step 2 Detach Voltage Selector P.C.B.. •...

  • Page 26: Disassembly Of Main P.c.b

    Step 3 Lift up Inner Chassis Unit to release the catches 8.9. Disassembly of Main P.C.B. between the Inner Chassis Unit and the Rear Panel. • Refer to “Disassembly of Top Cabinet”. Step 4 Release tabs. Step 5 Release Rear Panel. •...

  • Page 27: Disassembly Of Smps Module And Voltage Selector P.c.b

    8.10. Disassembly of SMPS Module Step 2 Detach Voltage Selector P.C.B.. Step 3 Detach 10P FFC at a connector (P2004) on Main and Voltage Selector P.C.B. P.C.B.. Step 4 Detach 24P FFC at a connector (P2005) on Main • Refer to “Disassembly of Top Cabinet”. P.C.B..

  • Page 28: Disassembly Of Cd Interface P.c.b

    Step 7 Release catches. 8.12. Disassembly of CD Interface Step 8 Detach Inner Chassis Unit. P.C.B. • Refer to “Disassembly of Top Cabinet”. • Refer to “Disassembly of Front Panel Unit”. • Refer to “Disassembly of CD Mechanism Unit”. Step 1 Remove 2 screws. Step 2 Desolder pins of the motor (M7301).

  • Page 29: Service Position

    9 Service Position Note: For description of the disassembly procedures, see 9.2. Checking and Repairing of the Section 8. Main P.C.B. and SMPS P.C.B. 9.1. Checking of Panel P.C.B. and Step 1 Remove Top Cabinet. LCD P.C.B. Step 2 Remove Front Panel Unit. Step 3 Remove Rear Panel.

  • Page 31: Block Diagram

    CLOSE SW CLOSE SW CN7002 P2004 CLOSE SW ROT JOG CN2500 CN9000 ROT JOG VR9001 CLOSE SW ROT JOG 41 CONTROL PANEL P.C.B. CD INTERFACE P.C.B. NOTE: “ * ” REF IS FOR INDICATION ONLY SA-AKX18PH/PN SYSTEM CONTROL (1/2) BLOCK DIAGRAM...
  • Page 32 UART TX BT UART RX UART RX BT UART TX BLUETOOTH FREQUENCY HOST WAKE HOST WAKE DEVICE LDO ON BT WAKE BT CTS BT UART RTS NOTE: “ * ” REF IS FOR INDICATION ONLY SA-AKX18PH/PN SYSTEM CONTROL (2/2) BLOCK DIAGRAM...

  • Page 33: Audio

    DOUT TUN SDO DAMP VALID 24 VALID SDIO 8 82 DSP SDA SCLK 7 75 DSP SCL 4 /RESET RST 5 TUN RST DAMP OTW 17 DAMP OTW GCGPIO2 18 TUN INT DC DET AMP FAN SA-AKX18PH/PN AUDIO BLOCK DIAGRAM...

  • Page 34: Power Supply

    ZJ1002* PCONT2 PCONT2 PCONT2 ZJ1002* PROTECT PROTECT PROTECT FROM/TO ZJ1002* SMPS-ID SMPS-ID SYSTEM CONTROL SMPS ID ZJ1002* TEMP DET TEMP-DET TEMP DET ZJ1002* SYNC SYNC SYNC NOTE: “ * ” REF IS FOR INDICATION ONLY SA-AKX18PH/PN POWER SUPPLY BLOCK DIAGRAM...

  • Page 35: Wiring Connection Diagram

    MAIN P.C.B. CN2500 P2005 P2004 TO OPTICAL PICKUP UNIT (CD MECHANISM UNIT) ZJ9001* PANEL P.C.B. CN7002 CD INTERFACE P.C.B. CN7001 CN9000 TO CD LOADING P.C.B. (CD MECHANISM UNIT) NOTE: " * " REF IS FOR INDICATION ONLY. SA-AKX18PH/PN WIRING CONNECTION DIAGRAM...

  • Page 37: Schematic Diagram

    12 Schematic Diagram 12.1. Schematic Diagram Notes • This schematic diagram may be modified at any time with the development of new technology. Notes: S7201: Reset switch S9001: Power switch ( S9002: Open/Close switch ( ). S9003: Tune Mode / Stop ( ) switch. S9004: DJ Jukebox switch.

  • Page 39: Main (Damp/Tuner/Aux/Usb/Dsp/Bluetooth/Voltage Regulators/Micon) Circuit

    US: MAIN (USB) SCHEMATIC DIAGRAM - 3 DS: MAIN (DSP) SCHEMATIC DIAGRAM - 4 VO: MAIN (VOLTAGE REGULATORS) SCHEMATIC DIAGRAM - 5 MI: MAIN (MICON) SCHEMATIC DIAGRAM - 6 ~ 8 NOTE: “ * ” REF IS FOR INDICATION ONLY SA-AKX18PH/PN MAIN (DAMP) CIRCUIT...
  • Page 40 AM ANT PW_3R3V 4.7K 4.7K 0.47 DSP_SDA DSP_SCL DGND TUN_RST DS: MAIN (DSP) SCHEMATIC DIAGRAM - 4 MI: MAIN (MICON) SCHEMATIC DIAGRAM - 6 ~ 8 NOTE: “ * ” REF IS FOR INDICATION ONLY SA-AKX18PH/PN MAIN (TUNER / AUX) CIRCUIT...
  • Page 41 VO: MAIN (VOLTAGE REGULATORS) SCHEMATIC DIAGRAM - 5 USB_B_D+ USB CIRCUIT (ZJ9301*) MI: MAIN (MICON) SCHEMATIC DIAGRAM - 6 ~ 8 IN SCHEMATIC DGND PW_USBA_5V DIAGRAM - 10 PW_USBB_5V PW_D5V NOTE: “ * ” REF IS FOR INDICATION ONLY SA-AKX18PH/PN MAIN (USB) CIRCUIT...
  • Page 42 TU: MAIN (TUNER/AUX) SCHEMATIC DIAGRAM - 2 VO: MAIN (VOLTAGE REGULATORS) SCHEMATIC DIAGRAM - 5 MI: MAIN (MICON) SCHEMATIC DIAGRAM - 6 ~ 8 NOTE: “ * ” REF IS FOR INDICATION ONLY SA-AKX18PH/PN MAIN (DSP) / MAIN (BLUETOOTH) CIRCUIT...
  • Page 43 DA: MAIN (DAMP) SCHEMATIC DIAGRAM - 1 US: MAIN (USB) SCHEMATIC DIAGRAM - 3 BT: MAIN (BLUETOOTH) SCHEMATIC DIAGRAM - 4 MI: MAIN (MICON) SCHEMATIC DIAGRAM - 6 ~ 8 SA-AKX18PH/PN MAIN (VOLTAGE REGULATORS) CIRCUIT NOTE: “ * ” REF IS FOR INDICATION ONLY...
  • Page 44 I2S_WCK I2S_WCK J0JCC0000309 LCD_DATA R2071 R2498 R2070 J0JCC0000309 LCD_WR PW_SYS_3R3V LED_DIMMER R2069 J0JCC0000309 R2068 LCD_CE J0JCC0000309 PCONT2 PCONT2 C2141 PCONT1 PCONT1 PROTECT LB2024 PROTECT J0JCC0000309 DC_DET_PWR PCONT2 DC_DET_PWR SMPS_ID SMPS_ID TEMP_DET TEMP_DET DC_DET_AMP_FAN DC_DET_AMP_FAN SYNC SYNC SA-AKX18PH/PN MAIN (MICON) CIRCUIT...
  • Page 45 TU: MAIN (TUNER/AUX) SCHEMATIC DIAGRAM - 2 R2171 C2179 DVD-LD 0.01 US: MAIN (USB) SCHEMATIC DIAGRAM - 3 GND-LD BT: MAIN (BLUETOOTH) SCHEMATIC DIAGRAM - 4 C2165 D2002 LB2011 VO: MAIN (VOLTAGE REGULATORS) SCHEMATIC DIAGRAM - 5 G1C100KA0101 DA2J10100L SA-AKX18PH/PN MAIN (MICON) CIRCUIT...
  • Page 46 PW_3R3V TO MAIN (MICON) R2417 CIRCUIT (2/3) DA: MAIN (DAMP) SCHEMATIC DIAGRAM - 1 TU: MAIN (TUNER/AUX) SCHEMATIC DIAGRAM - 2 DS: MAIN (DSP) SCHEMATIC DIAGRAM - 4 VO: MAIN (VOLTAGE REGULATORS) SCHEMATIC DIAGRAM - 5 SA-AKX18PH/PN MAIN (MICON) CIRCUIT...

  • Page 47: Panel Circuit

    PW_SYS_3R3V LCD_CE PW_SYS_3R3V LCD_CE LCD_WR LED_DIMMER LED_DIMMER LCD_WR PW_3R3V LCD_DATA LCD CIRCUIT (ZJ6000*) PW_3R3V FL_DAT PW_5V PW_3V3 IN SCHEMATIC PW_5V PW_3V3 LED_DIMMER DIAGRAM - 10 LED_DIMMER PW_5V PW_5V NOTE: “ * ” REF IS FOR INDICATION ONLY SA-AKX18PH/PN PANEL CIRCUIT...

  • Page 48: Lcd, Usb & Cd Interface Circuit

    SPM- CLOSE_SW REST_SW MAIN (MICON) DGND CIRCUIT (P2004) OPEN_SW IN SCHEMATIC LDM- DIAGRAM - 7 S7201 LDM+ RESET TRV- TRV+ M7301* TRAVERSE MOTOR NOTE: “ * ” REF IS FOR INDICATION ONLY SA-AKX18PH/PN LCD / USB / CD INTERFACE CIRCUIT...

  • Page 49: Printed Circuit Board

    13.1. Main P.C.B. & CD Interface P.C.B. MAIN P.C.B. (REP5061B...PH) CD INTERFACE P.C.B. (REP4945A) (REP5061A...PN) M7302* (SPINDLE MOTOR) S7201 (RESET) CN7002 CN7001 M7301* TO LOADING P.C.B. (TRAVERSE (CD MECHANISM MOTOR) UNIT BRS12C) 3556A 3556A PbF 3760A 3760A (SIDE A) SA-AKX18PH/PN MAIN / CD INTERFACE P.C.B.
  • Page 50 C6592 C6500 Q6001 R6512 ZJ1002* R1070 R6511 (TO SMPS MODULE P.C.B.) C6068 Q6007 R6055 Q6002 R6061 C6063 R6057 Q6300 L6006 C6027 R6056 L6005 C6047 3760A 3760A (SIDE B) NOTE: " * " REF IS FOR INDICATION ONLY SA-AKX18PH/PN MAIN P.C.B.

  • Page 51: Panel, Lcd & Usb P.c.b

    3761AC D9301 (TUNE MODE/ S9009 3761AC STOP) (REW) S9014 S9007 (RADIO/AUX) (D.BASS) W101 S9008 S9002 (USB REC/ (OPEN/CLOSE) PAUSE) CN9000 W100 3761AA 3761AA VOLUME NOTE: " * " REF IS FOR INDICATION ONLY SA-AKX18PH/PN PANEL / LCD / USB P.C.B.

  • Page 53: Appendix Information Of Schematic Diagram

    CD PLAY STANDBY IC1005 REF NO. MODE CD PLAY STANDBY IC2001 REF NO. MODE CD PLAY STANDBY IC2001 REF NO. MODE CD PLAY STANDBY IC2001 REF NO. MODE CD PLAY STANDBY REF NO. IC2001 MODE CD PLAY STANDBY SA-AKX18PH/PN MAIN P.C.B.
  • Page 54 REF NO. MODE CD PLAY STANDBY IC2500 REF NO. MODE CD PLAY STANDBY IC2501 REF NO. MODE CD PLAY STANDBY IC2502 REF NO. MODE CD PLAY STANDBY IC6000 REF NO. MODE CD PLAY 12.5 12.5 STANDBY 12.6 12.5 SA-AKX18PH/PN MAIN P.C.B.
  • Page 55 CD PLAY 12.8 16.1 13.4 STANDBY 12.8 16.1 13.4 Q6001 Q6002 Q6007 Q6300 QR1003 REF NO. MODE CD PLAY 32.6 16.3 11.7 16.3 11.7 STANDBY 32.6 16.3 11.7 16.3 11.7 QR2002 QR2500 REF NO. MODE CD PLAY STANDBY SA-AKX18PH/PN MAIN P.C.B.
  • Page 56 REF NO. MODE CD PLAY STANDBY IC900 REF NO. MODE CD PLAY STANDBY IC900 REF NO. MODE CD PLAY STANDBY Q900 REF NO. MODE CD PLAY STANDBY SA-AKX18PH/PN LCD P.C.B. 14.1.5. Waveform Table 2.1Vp-p(10msec/div) 3.4Vp-p(20usec/div) 4.2Vp-p(5msec/div) 58Vp-p(1usec/div) 1.5Vp-p(2nsec/div) 5Vp-p(1usec/div) 250Vp-p(20nsec/div)

  • Page 57: Exploded View And Replacement Parts List

    15.1. Exploded View and Mechanical Replacement Part List 15.1.1. Cabinet Parts Location IR9000 (PANEL P.C.B.) DP900 VR9001 *ZJ9001 (LCD P.C.B.) *ZJ6000 CN9000 VR9000 (USB P.C.B.) JK9300 JK9301 *ZJ9301 SA-AKX18PH/PN-K CABINET DRAWINGS NOTE: " * " PART IS NOT SUPPLIED / REF IS FOR INDICATION ONLY.
  • Page 58 P2004 (FOR PH ONLY) P2002 (BRS12C) (FOR PH ONLY) (MAIN P.C.B.) CN2500 CN2502 *ZJ1002 (SMPS MODULE P.C.B.) CN7002 (CD INTERFACE P.C.B.) CN7001 S7201 SA-AKX18PH/PN-K NOTE: " * " PART IS NOT SUPPLIED / REF IS FOR INDICATION ONLY. CABINET DRAWINGS...
  • Page 59 15.1.2. Packaging ACCESSORIES BAG A1-1 AC CORD (FOR PH ONLY) AC CORD SA-AKX18PH/PN (FOR PN ONLY) OI BOOK FM INDOOR ANTENNA AM LOOP ANTENNA SB-AKX18PN AC PLUG ADAPTOR (FOR PH ONLY) F R O N T POLYFOAM (TOP) SC-AKX18PH/PN-K POLYFOAM (BOTTOM)
  • Page 61 15.1.3. Mechanical Replacement Part List Safety Ref. Part No. Part Name & Qty Remarks Description Safety Ref. Part No. Part Name & Qty Remarks RHD30111-31 SCREW Description RHD30119-S SCREW RHD30119-S SCREW CABINET RHDX031008 SCREW CHASSIS RKAX0042-K LEG CUSHION RKM0713-K1 TOP CABINET REE1730 10P FFC (MAIN-CD RKW1027-Q...
  • Page 62 Safety Ref. Part No. Part Name & Qty Remarks Description PACKING MATERI- RPG0K57 PACKING CASE RPG0K58 PACKING CASE RPN2641 POLYFOAM RPFX0198-1 (MIRAMAT SHEET) ACCESSORIES N2QAYB000944 REMOTE CONTROL A1-1 RKK-AKX18PHK BATTERY COVER K2CB2CB00022 AC CORD K2CQ2YY00119 AC CORD RQT9894-1M O/I BOOK(En/Sp) RSAX0002 INDOOR ANTENNA...

  • Page 63: Electrical Replacement Parts List

    15.2. Electrical Replacement Parts List Safety Ref. Part No. Part Name & Qty Remarks Description Safety Ref. Part No. Part Name & Qty Remarks IC2502 C0DBZYY00716 (E.S.D) Description IC6000 C1AB00003994 (E.S.D) IC6500 VUEALLPT090 (E.S.D) PRINTED CIRCUIT IC7001 C0DBGYY00969 (E.S.D) BOARDS TRANSISTORS PCB1 REP5061A...
  • Page 64 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description VARISTORS LB9300 J0JHC0000118 INDUCTOR LB9301 J0JHC0000118 INDUCTOR VR9000 EVEKE2F3524B VOLUME JOG R2004 J0JCC0000309 INDUCTOR VR9001 K9AA012Y0012 SELECTOR JOG R2005 J0JCC0000309 INDUCTOR VA51 EZAEG2A50AX...
  • Page 65 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description JK52 K4AC02B00042 JK AM ANTENNA R1068 ERG2SJ470E JK6000 K4AL04B00001 JK SPEAKERS R1069 D0GBR00J0004 1/10W JK6002 K2HA2YYA0009 JK AUX IN R1070 D0GB222JA065 2.2K 1/10W...
  • Page 66 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description R2185 D0GBR00J0004 1/10W R6542 D0GB103JA065 1/10W R2186 D0GBR00J0004 1/10W R6550 D0GB221JA065 1/10W R2192 D0GBR00J0004 1/10W R6551 D0GB221JA065 1/10W R2222 D0GBR00J0004 1/10W R6552 D0GBR00J0004...
  • Page 67 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description C2005 F1H1H1010005 100pF C2530 F1G1H471A830 470pF C2006 F1H1H1010005 100pF C2531 F1G1H471A830 470pF C2007 F1H1H1010005 100pF C2532 F1G1H471A830 470pF C2104 F1H1C104A041 0.1uF C2533 F1G1H103A835...
  • Page 68 MMH1401...

This manual is also suitable for:

Sa-akx18pn

Table of Contents