Advertisement
10. Install the supplied angle adjustment screws at the bottom edge of the frame.
Note: The bottom edge is closest to the DOWNSIDE label.
11. Hook one of the supplied springs into the hole in the bottom edge of the frame, and then hook the other end to the inside of
the frame.
Mounting the Screen
Caution:
Make sure you are wearing the provided white gloves before you pick up the screen. If you touch the screen material with your bare hands,
you may damage the screen.
To avoid scratching the wall when you mount the screen, we suggest covering the backsides of the frame's top corners with painter's tape. Once
you have properly positioned the screen, you can remove the tape. Be careful not to scratch the wall if you remove the screen from the wall.
1.
Carry the screen to the wall, then lean it against the wall at a 15° angle.
Caution: Always hold the screen by the left and right edges when moving it.
Note: Make sure the DOWNSIDE label is at the bottom of the screen and facing the wall. If you install the screen upside down, the
image quality will be poor.
15°
Mounting the Screen
11
Advertisement
