Advertisement
Notes
Security
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
●
Observe national provisions and comply with the appropriate safety regulations.
Engineering
When designing and constructing the system, be sure to adhere to the installation and
operation guidelines for the product, and comply with relevant national laws and regulations
strictly.
Mounting and installation
Mounting
●
The device is suitable for semi-flush mount.
●
The device must be installed and debugged by a professionally-trained and authorized
engineers.
●
Keep devices away from strong magnetic field, high temperature and wet environment.
●
Do not fall the device to the ground and avoid hard impact.
●
Do not use wet cloth or volatile reagent to wipe the device.
●
Do not disassemble the device.
Wiring
●
Equipped with protective features against over-voltage, over-current, short circuit and
reverse polarity in the power supply.
●
All connectors must be soldered using tin wires. Otherwise, resistance will be generated
in the contacts over time which cause unstable operation.
●
The device is powered with direct current. Avoid reversing the positive and negative
poles of the power supply.
●
When connecting the device, ensure that the device is properly insulated.
Commissioning
●
Power supply is KNX with a DC 24...30 V auxiliary supply voltage.
●
album), configurable icons for home page or multi-functional pages with Micro SD card,
the interruption of the power supply may cause the system's failure in starting.
●
Make sure the Micro SD card only contains the firmware that needs to be used for
upgrading, otherwise it may cause a system damage.
●
If the device to be powered off after a setting change, it's highly recommended to cut off
the power 6 seconds later after the change is done. Otherwise there is the risk of an
unsuccessful change.
Siemens
Smart Infrastructure
CAUTION
WARNING
During the process of modifying the wall paper, screen saver (electronic photo
Datasheet
5
A6V11980238_en--_a
2021-01-28
Advertisement
