13-2.Spacing - Mitsubishi Electric CITY MULTI PURY-HP72TNU-A Data Book

13. OUTDOOR INSTALLATION
13-2. Spacing
In case of single installation
(1) When all walls are within their height limits*.
L3
L1
When the distance behind the unit (L2) needs to be small
When the distance to the right or left (L3) needs to be small
(2) When one or more walls exceed their height limits*.
When the wall(s) at the front and/
or the right/left exceed(s) their
height limits
h3
h1
L3
L1
Add the dimension that exceeds the height limit (shown as "h1" through "h3" in the figures) to L1, L2, and L3 as shown in the
table below.
When the distance behind the unit (L2) needs to be small
When the distance to the right or left (L3) needs to be small
(3) When there are overhead obstacles
≥45°
≥ 50 (2)
MEES19K180
* Height limit
Front/Right/Left/Rear Same height or lower than the overall height of the unit
L2
When the wall at the rear exceeds
its height limit
h2
L2
≥ 240 (9-1/2)
Required minimum distance [mm (in)]
L1 (Front) L2 (Rear)
450 (17-3/4) 300 (11-13/16)
450 (17-3/4) 450 (17-3/4)
h2
L2
L3
L1
Required minimum distance [mm (in)]
L1 (Front)
450 (17-3/4) + h1 300 (11-13/16) + h2
450 (17-3/4) + h1 450 (17-3/4) + h2
≥ 1000 (39-3/8)
Air outlet guide
(not supplied)
Hyper Heating Inverter R2-Series
L3 (Right/Left)
450 (17-3/4)
30 (1-3/16)
When all walls exceed their height
limits
h2
h3
h1
L3
L2
L3
L1
L2 (Rear) L3 (Right/Left)
450 (17-3/4) + h3
30 (1-3/16) + h3
[mm (in)]
116