Startup Process - Huawei NetCol8000-A Quick Manual

9.2

Startup Process

1. First startup flowchart
Start
Tap Start on the home screen.
After tapping Yes, the barcode and the
verification code are shown on the screen.
Open the Service Expert app.
Tap StartUp > Offline Activation on APP
Enter Bar code and Verification code,
and tap Generate PWD.
Enter the generated startup password on
the screen of smart cooling product.
Tap Enter. The screen turns to Wizard
Startup.
Refrigerant is fully charged?
No
Tap No on Wizard Startup screen to exit
wizard startup.
Tap Start on the home screen and choose
Maint > Diagnostic Mode > Enter.
Set the compressor to 3000 rpm.
Charge the remaining amount of
refrigerant from low-pressure needle
valve.
Choose Maint > Diagnostic Mode > Exit
and tap Shutdown on the home
screen.
Choose Maint > Wizard Startup to
enter wizard startup.
Go to step 2
2. Wizard startup flowchart
Start
Precautions
Yes
Select commissioning
items
Yes
Indoor fan commissioning
Success
Outdoor fan commissioning
Success
Electric heater
commissioning
Success
Humidifier commissioning
Success
Cooling system
commissioning
Success
End
Yes
Tap Yes on
Wizard
Startup screen
to enter wizard
startup.
34
No
No
Commissionin
Fail g interrupted
(Handle the
fault by
Fail
referring to
the tips
displayed on
Fail
the home
screen.
Perform
wizard startup
Fail
after the
handling.)
Fail
If there is no water supply,
clear the humidifier
commissioning item when
wizard startup
commissioning. After
Wizard startup, lift the
low liquid level detector.
After at least 5 seconds,
choose Running > Device
Details > Humidifier to
check that Low liquid
level states is Triggered.
Choose Running > Device
Details > Humidifier >
Advanced to check that
Humidifier pump control
states is On, the
humidifier is functional.