Product Configuration - Huawei FusionPower6000 Product Description

FusionPower6000
Product Description

4.2.3.1.1 Product Configuration

The ECC800-Pro data center controller is used to monitor the devices of the
PowerPOD. It consists of power modules and the main control module. The power
modules and main control module are hot swappable.
You can configure the ECC800-Pro collector in the following two manners:
Configuration 1 (typical configuration): one power module and one main control
module
Configuration 2: two power modules and one main control module.
Figure 4-15 ECC800-Pro collector in configuration 2
(1) Slot 1: power module
Table 4-15 ECC800-Pro environmental specifications
Item
Operating
temperature
Storage temperature
Humidity
Altitude
Table 4-16 ECC800-Pro structural specifications
Item
Dimensions (H x W x D)
Weight
Color
Issue 02 (2021-06-30)
NO TE
● In configuration 1, install a filler panel in slot 2.
● In configuration 2, install power modules in slots 1 and 2.
Copyright © Huawei Technologies Co., Ltd.
(2) Slot 2: power module
Specifications
–20°C to +50°C
–40°C to +70°C
5%–95% RH (non-condensing)
0–4000 m (When the altitude is between 3000 m and
4000 m, the temperature decreases by 1°C for each
additional 200 m.)
Specifications
43.6 mm x 330 mm x 442 mm
7.5 kg (dual power supplies + main
control module)
Black
4 Product Overview
(3) Slot 3: main control
module
37