Appendix; Certificates & Approvals; Approvals - Siemens SIMATIC Ident Operating Instructions Manual

Appendix

A.1 Certificates & approvals
A.1.1

Approvals

Note
Granted approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
Current approvals
SIMATIC NET/SIMATIC Ident products are regularly submitted to the authorities and approval
centers for approvals relating to certain markets and applications.
Contact your Siemens representative if you need a list of the current approvals for the
individual devices or check the Internet pages of Siemens Industry Online Support:
Current approvals (https://support.industry.siemens.com/cs/ww/en/ps/15666)
Go to the relevant product there and select the "Certificates" entry type from the "Entry list"
tab.
Overview of the approvals and standards
The communications module RF120C has the following approvals and meets the following
standards:
• EC directives and standards
– EU directive 2014/30/EU "Electromagnetic Compatibility" (EMC directive) according to
– EU Directive 2011/65/EU "Restriction of the use of certain hazardous substances in
• cULus LISTED IND. CONT. EQ.
• RCM
• KCC-REM-S49-SIMATICRF
• ATEX
SIMATIC RF120C
Operating Instructions, 02/2021, C79000-G8976-C328-03
the following standards:
EN 61000-6-2, EN 55011
electrical and electronic equipment" (RoHS)
A
37