Hardware
3.7.8
Replacing the Battery
Note:
Make sure you have adequate ESD protection.
Note:
Make sure to make a backup copy of the operator panel project. See the
Software
Products
section.
E1012 and E1022
These operator panels use a rechargeable battery.
E1032, E1060, E1041, E1043, E1061, E1062 and E1063
The following is needed:
– A new battery, see the
Available Spare Parts
list.
Follow the steps below to replace the battery:
1. Power off the operator panel.
2. Open the battery cover.
3. Use a non conductive pair of pliers to extract the battery.
Battery
4. Insert the new battery.
5. Re-assemble the battery cover.
Note:
The removed lithium battery should be recycled.
40
Mitsubishi Electric, MA00758A