Loading Photo Paper - Brother DCP-395CN User Manual

If you have problems printing on
envelopes with the flap on the short
edge, try the following suggestions:
a
Open the envelope flap.
b
Put the envelope into the paper tray with
the address side down and the flap
positioned as shown in the illustration.
c
Adjust the size and margin in your
application.
Loading paper and documents

Loading photo paper

Use the photo paper tray which has been
2
assembled on the top of the output paper tray
cover to print on Photo (10 × 15 cm) and
Photo L (89 × 127 mm) size paper. When you
use the photo paper tray, you do not have to
take out the paper that is in the tray beneath
it.
a
Squeeze the blue photo paper tray
release button (1) using your right index
finger and thumb and push the photo
paper tray forward until it clicks into the
photo printing position (2).
1
2
3
3 Photo Paper Tray
b
Press and slide the paper side
guides (1) and paper length guide (2) to
fit the paper size.
1
2
2
2
13