SUN2000-4.95KTL-JPL0
User Manual
2.4 Working Principle
Schematic Diagram
The solar inverter receives inputs from up to four PV strings. Then the inputs are grouped into
two MPPT routes inside the solar inverter to track the maximum power point of the PV strings.
The DC power is then converted into single-phase AC power through an inverter circuit.
Surge protection is supported on both the DC and AC sides.
Figure 2-6 Schematic diagram
Issue 03 (2020-06-03)
The nameplate figure is for reference only.
Copyright © Huawei Technologies Co., Ltd.
2 Product Overview
12