Table of Contents
Advertisement
Enable
The Administrator has two options for Motion Detection;
a. Always On or
b. On Schedule, the Administrator can set up to 4 different time slots for
motion detection.
Check that you have setup valid Email / FTP accounts first
before proceeding with the rest of the configuration
Detection Sensitivity
This will determines the level of change before motion capture is
triggered. A high percentage means a small change will trigger motion
capture.
Send image every ... second(s)
Select either; 0.5, 1, 2, 3, 4 or 5 seconds.
Stop sending after ... email(s) or image idle for ... second(s)
ASUS Mimic CX200 will stop sending emails on the lower of the two
conditions. The Administrator can set between 1, 3, 5, 7 and 10
seconds. Emails can be set from 1 to 99999 pieces or 0 for stop
sending email only when image idle occurred.
Schedule
When the unit is set to On Schedule, the Administrator can configure the
four preferred schedule time slots for motion detection. Time must be
entered in 24hr format.
Send to FTP Server
Click Yes to activate. This option allows the administrator to send and
store the motion detected images on a FTP site. This is useful for future
reference and recording purpose.
ASUS CX200 Internet Camera
Advertisement
Table of Contents
