Section 2. Using the Utility Program
The Utility main menu is shown below. The selection menu is located on
the left. The Serial Number, current Firmware and IP Address of every
ASUS Mimic CX200 connected to the LAN will be displayed on the table
to the right.
2.1 Setup Wizard
Click Setup Wizard to take you through the setup process.
1. Click to select the ASUS Mimic CX200 you want to configure on the
right.
2. Click on Setup Wizard.
3. Enter the necessary camera configurations. Choose the appropriate
frequency (Indoor 60 Hz, Indoor 50 Hz or Outdoor) to prevent flickering
on the video feed. Enter a name for the camera in the Location box to
identify the camera.
0
ASUS CX200 Internet Camera