Table of Contents
Advertisement
ii. Management Protocol
This setting allows the administrator to determine the LAN HTTP
access (web) to ASUS Mimic CX200 IP camera. For added security, the
administrator can choose to use either the default open port 80 or other
ports (between 1 to 65534).
Once the HTTP port number is set to another port (other than 80), the
full LAN IP address must be entered in order to access the ASUS Mimic
CX200 web interface.
Example:
If a value of say, 8080 is set as the HTTP port number, then enter
http://192.168.0.177:8080 in order to access ASUS Mimic CX200 web
interface.
Uncheck to disable this function.
2.4 Upgrade Firmware
Click this to bring up the upgrade firmware dialog box.
To check the internet for the latest firmware, click Next
Otherwise, check Upgrade the firmware with file saved on the local hard
drive.
Click Browse to choose the location where the *.bin file is located.
2.5 About
Click this button to show the software and version details.
0
ASUS CX200 Internet Camera
Advertisement
Table of Contents
