Finding Motion (Only Nvr Recordings); Finding Logbook Entries - Bosch LTC-1311-20 Operator's Manual

28 en | Managing recorded videos
6.
7.
8.11

Finding motion (only NVR recordings)

Main window >
You can check the video in the selected Image pane for motion.
To find motion:
1.
2.
3.
4.
5.
6.
7.
8.12

Finding Logbook entries

Main window > Tools menu > Find in Logbook... command > Select Search Parameters dialog
box
In the Logbook, you can search for particular events, alarms, devices, and strings of events.
You can save the search criteria as a filter.
To find Logbook entries:
1.
2.
3.
4.
5.
6.
7.
8.
Operator Client | V3 | 2010.07
Click Search to start the Forensic Search.
The window with the matching entries is displayed.
For playing the corresponding video, double-click the entry. The corresponding video is
displayed.
>
Select the Image pane where you want to find motion.
Using the Hairline, select the time period on the Timeline.
Click .
The Motion Search dialog box is displayed.
The selected time period is copied to the Start: and End: fields.
If required, change the values.
If required, select Display Grid. A grid is placed above the image. You can select every
cell in the grid for searching.
Select the cells you want to check for motion. To select the cells, drag an area.
The selected area is displayed in half transparent yellow.
To clear a selected area, drag the selected area again.
Click Start Search. The search results for the selected Image pane are listed in the
window.
For playing the corresponding video, double-click the entry. The corresponding video is
displayed.
In the Filter list, select a pre-defined filter if available.
A filter contains all the settings that you make in this dialog box.
You can save, load, and delete the selected filter. You can reset the settings of the
selected filter.
In the Date and Time field, enter start date and time and end date and time for the
search process.
In the Result Count list, limit the number of matching entries that result from the search.
Click Add Event to limit the search to specific events.
Click ATM / POS to enter search criteria for these devices.
Click Virtual Inputs to enter search criteria for these devices.
In the Alarms field, select search criteria to limit the search to specific alarms.
Click Add Device to limit the search to specific devices.
Operator's Manual
tab > Select an Image pane
Bosch Video Management System
Bosch Sicherheitssysteme GmbH