Status Display; Using A Keyboard Connected To A Workstation - Bosch LTC-1311-20 Operator's Manual

34 en | Using a CCTV keyboard
3
4
10.1.1

Status display

The status display changes dynamically to display information about the keyboard's present
mode of operation.
The following illustration shows the various elements of the status display:
5
4
3
1
2
3
4
5
10.2

Using a keyboard connected to a workstation

A keyboard connected to a Bosch Video Management System workstation offers a wide
variety of features. Both the analog and the digital mode are available.
Operator Client | V3 | 2010.07
Function keys
Numeric keypad with ENTER key
1
MON
A0
1
D1
PTZ
Monitor
Camera
PTZ / JOGSHUTTLE
D1
A0
Operator's Manual
Allow you to control certain functions directly.
Prod: Starts a scan process to find the connected
workstation. If scanning is successful: In the
softkey display, Terminal and Keyboard Control
menus are displayed. For selecting Bosch Video
Management System, press the Terminal softkey.
Mon: Allows you to enter a monitor number
(digital or analog monitor).
Clr: Clears any numeric entry or has a Back-
function.
: Currently not supported.
Shot: Allows you to select a camera pre-position
or to leave Selection mode.
Allows you to enter logical numbers. The number
is displayed in the status display.
Unless preceded by pressing the Mon or Shot
key, a numeric entry is interpreted as a logical
camera number. The camera with the entered
number is displayed in an Image pane or an
analog monitor.
2
CAM
1
BOSCH VMS
Displays the selected analog monitor or Image pane
number.
Displays the selected camera number.
Displays the current operation mode.
Displays the selected computer monitor number.
Displays the selected analog monitor number.
Bosch Video Management System
Bosch Sicherheitssysteme GmbH