Using A Cctv Keyboard; Cctv Keyboard User Interface - Bosch LTC-1311-20 Operator's Manual

Bosch Video Management System
10

Using a CCTV keyboard

This chapter describes how to use Bosch Video Management System with a CCTV keyboard.
The language of display texts in the keyboard is English.
10.1

CCTV keyboard user interface

NOTICE!
Every input on the keyboard is cleared after some seconds if no further input is made.
This chapter describes the user interface of the CCTV keyboard.
The following illustration shows the various interface elements of the keyboard:
1
2
Bosch Sicherheitssysteme GmbH
1
1
Softkeys and softkey display
Status display
Operator's Manual
2
Monitor Camera
1 1
Bosch VMS
Prod Mon
Clr Shot
1 2 3
4 5 6
7 8 9
0
4
Allow you to use a fixed set of commands or to
control the Logical Tree. The commands displayed
in the softkey display change depending on the
operation mode.
Changes dynamically and displays information on
the current operation mode.
Using a CCTV keyboard | en
3
Operator Client | V3 | 2010.07
33