30
en | Installation
5.2.1
Surface mount
Figure 1 Surface mounting
When using the surface mount box:
1.
2.
3.
4.
Note:
The surface mount box can be attached to a 4S box if required.
AR18-10-B006 | v1.1 | 2010.06
With a side connection, remove the cap covering the side
entrance.
With a rear connection, leave the cap in place.
Attach the conduit to the surface mount box.
Attach the surface mount box to the surface.
Suspend the camera base from the plastic hook inside the
surface mount box until the connections are made.
Installation and Operation Manual
FlexiDome2X IP Camera
Bosch Security Systems