Brother MFC-5460CN User Manual page 122

Error Message Cause
Data Remaining Print data is left in the machine's
memory.
Print data is left in the machine's
memory. The USB cable was
unplugged while the computer was
sending the data to the machine.
The other person or other person's
Disconnected
fax machine stopped the call.
The document was not inserted or
Document Jam
fed properly, or the document
scanned from the ADF was too
long.
High Temperature The print head is too warm.
Init Unable XX The machine has a mechanical
problem.
—OR—
A foreign objects such as a clip or
ripped paper is in the machine.
One or more of the ink cartridges is
Ink Empty XX
empty. The machine will stop all
print operations. While memory is
available, black and white faxes will
be stored in the memory. If a
sending machine has a colour fax,
the machine's
that the fax be sent as black and
white. If the sending machine has
the ability to convert it, the colour
fax will be stored in the memory as
a black and white fax.
Low Temperature The print head is too cold.
The memory card is either
Media Error
corrupted, incorrectly formatted, or
there is a problem with the memory
card.
One or more of the ink cartridges
Near Empty XX
are running out of ink. If a sending
machine has a colour fax, the
machine's
the fax be sent as black and white.
If the sending machine has the
ability to convert it, the colour fax
will be received into memory as a
black and white fax.
112
' '
handshake will ask
' '
handshake will ask that
Action
Re-start printing from your computer.
Press Stop/Exit. The machine will cancel the job
and clear it from the memory. Try to print again.
Try to send or receive again.
See Using the ADF on page 8.
See Document jam on page 115.
Allow the machine to cool down.
Open the scanner cover and remove any foreign
objects inside the machine. If the error message
continues, see Transferring your faxes or Fax
Journal report on page 114 before disconnecting
the machine so you will not lose any important
messages. Then, disconnect the machine from
the power for several minutes and then reconnect
it.
Replace the ink cartridges. (See Replacing the
ink cartridges on page 119.)
Allow the machine to warm up.
Put the card firmly into the slot again to make
sure it is in the correct position. If the error
remains, check the media drive by putting in
another memory card that you know is working.
Order a new ink cartridge.