Brother MFC-5460CN User Manual page 27

d
Gently put the paper into the paper tray
print side down and top edge first.
Check that the paper is flat in the tray and
below the maximum paper mark (1).
1
Note
When you put the paper into the paper tray,
slide the paper in making sure that it touches
the paper length guide (1) first, then gently
lower the other end of the paper.
1
e
Gently adjust the paper side guides with
both hands to fit the paper.
Make sure the paper side guides touch
the sides of the paper.
Note
Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
Loading documents and paper
f
Push the paper tray firmly back into the
machine.
Note
If you are using Auto Select, after refilling
the paper tray you should open and close
the scanner cover to reset the machine.
2
17