4 Configuration and Settings
4.2 Monitoring of signals/process values of LOGO! 8 with LOGO! CMR
No.
8.
Navigate to "Monitoring > LOGO! BM" and make the following settings:
1.
Activate checkbox "Active" to activate the connection from LOGO! CMR to LOGO! 8.
2.
Enter the IP address of your LOGO!.
3.
Select in which time interval the process image of LOGO! shall be read ("Query interval for
process image").
Note:
It is recommended to select a query interval of "1 second".
4.
Click on "Apply" to save the settings.
5.
With "Ping LOGO! BM" you can verify whether the connection between LOGO! CMR and
LOGO! has been successful.
9.
The configuration of the settings for sending and receiving SMS messages with LOGO! CMR
has now been completed successfully.
4.2
Monitoring of signals/process values of LOGO! 8 with
LOGO! CMR
Note
In the completed configuration file for LOGO! CMR also offered in this application
example for download, the settings for the monitoring of signals and process
values of LOGO! 8 have already been made with LOGO! CMR.
After you have configured the basic settings for sending and receiving of SMS
messages with LOGO! CMR, as described in Chapter 4.1, you can, in the web
interface (WBM) of LOGO! CMR, specify which signals and process values of
LOGO! 8 shall be able to be monitored via SMS or changed at any time.
Table 4-2
No.
1.
In the web interface (WBM) of LOGO! CMR you navigate to "Monitoring" and make the following
settings:
LOGO! Set 1
Entry ID: 109063024,
V1.0,
1
07/2015
Action
2
3
4
Action
5
13