5 Installation and Commissioning
5.3 Commissioning
5.3.3
Downloading a program into LOGO! 8
Note
It is assumed that LOGO! 8 has been connected to a power supply and a PC
network.
In this application example a completed LOGO! program for LOGO! 8 is offered for
download. The table below contains a description on how to load the completed
LOGO! program into LOGO! 8. Start LOGO!Soft Comfort V8 and make the
following settings:
Table 5-3
No.
1.
Navigate to "File > Open" and select the downloaded LOGO! program
"Street_light_control_with_SMS".
2.
Click on the "Download" button or press Ctrl+D.
3.
Select the "Interface" for your connection to LOGO! and enter the IP address of your LOGO!.
Click on "Test" to check whether the connection has been successful. If the connection is
successful click "OK" in order to load the program into the device.
LOGO! Set 1
Entry ID: 109063024,
V1.0,
Action
07/2015
22