Address Space - Siemens SIMATIC S7-1500 Manual

Address space

4.1 Address space
The module can be configured in various ways in STEP 7. Depending on the configuration,
additional/different addresses are assigned in the process image of the outputs/inputs.
Configuration options of DQ 16x24VDC/0.5A BA
You can configure the module with STEP 7 (TIA Portal) or with a GSD file.
When you configure the module by means of the GSD file, the configurations are available
under different abbreviations/module names.
The following configurations are possible:
Table 4- 1 Configuration options
Configuration
1 x 16-channel without value status
2 x 8-channel without value status
1 x 16-channel with value status for module-
internal Shared Output with up to 4 submodules
Digital output module DQ 16x24VDC/0.5A BA (6ES7522-1BH10-0AA0)
Manual, 09/2014, A5E32364017-AB
Short designa-
tion/module name in the
GSD file
DQ 16x24VDC/0.5A BA
DQ 16x24VDC/0.5A BA
S
DQ 16x24VDC/0.5A BA
MSO
Configuration software, e.g., with STEP 7
(TIA Portal)
Integrated in hard- GSD file in STEP 7
ware catalog (TIA Portal) V12 or
STEP 7 (TIA Portal) higher or STEP 7
V5.5 SP3 or higher
V13 or higher
V13 Update 3 or
higher
(PROFINET IO
(PROFINET IO only)
V13 Update 3 or
higher
(PROFINET IO
(PROFINET IO only)
4
X
X
only)
X
only)
13