Siemens SIMATIC S7-1500 Manual page 21

Switching capacity of the outputs
With resistive load, max.
With lamp load, max.
Load resistance range
Low limit
High limit
Output voltage
Type of output voltage
for signal "1", min.
Output current
For signal "1" rated value
For signal "1" permitted range, max.
For signal "0" residual current, max.
Output delay with resistive load
"0" to "1", max.
"1" to "0", max.
Parallel switching of 2 outputs
For logical operations
For increased performance
For redundant activation of a load
Switching frequency
With resistive load, max.
With inductive load, max.
With lamp load, max.
Total current of the outputs
Max. current per channel
Max. current per group
Max. current per module
Cable length
Cable length shielded, max.
Cable length unshielded, max.
Interrupts/diagnostics/status information
Substitute values can be applied
Interrupts
Diagnostics interrupt
Diagnostics alarms
Diagnostics
Diagnostics indicator LED
RUN LED
ERROR LED
MAINT LED
Monitoring of the supply voltage
Channel status display
Digital output module DQ 16x24VDC/0.5A BA (6ES7522-1BH10-0AA0)
Manual, 09/2014, A5E32364017-AB
Technical specifications
6ES7522-1BH10-0AA0
0.5 A
5 W
48 Ω
12 kΩ
DC
L+ (-0.8 V)
0.5 A
0.5 A
0.5 mA
100 µs
500 µs
Yes
No
Yes
100 Hz
0.5 Hz; acc. to IEC 947-5-1, DC13
10 Hz
0.5 A; see additional description in the manual
4 A; see additional description in the manual
8 A; see additional description in the manual
1000 m
600 m
No
No
No
Yes; green LED
Yes; red LED
No
Yes; green LED
Yes; green LED
21