One Touch Dialing; Speed Dialing; Hold; Pause - Brother FAX 355MC Owner's Manual

54
C H A P T E R E I G H T
See
Storing One
Touch Dial
Numbers
p. 47
See
Storing Speed
Dial Numbers
p. 49

One Touch Dialing

1
Pick up the handset—OR—Press
2
When you hear a dial tone, press the One Touch key of the location you
want to call.
3
To hang up a voice call, replace the handset—OR—Press
If you try to use a One Touch location with no number stored in it, you
hear a warning sound, and screen displays NOT REGISTERED. The
display returns to normal after 2 seconds.
If you are sending a fax, press
you picked up the handset, press
answers with fax tones.

Speed Dialing

1
Pick up the handset—OR—Press
2
When you hear a dial tone, press
Speed Dial number.
3
To hang up, replace the handset—OR—Press
If you are sending a fax, press
number. If you picked up the handset, press
machine answers with fax tones.

Hold

1
Press to put a call on Hold.
Hold/Caller ID
2
You can put down the handset without disconnecting the call.
3
Pick up the fax machine handset—OR—Press
the call from Hold. Picking up an extension handset will not release the
call from Hold.

Pause

Press Redial/Pause to insert a pause between numbers. Each key press adds a
3.5 second delay.
.
Speaker Phone
after pressing the One Touch key. If
Start
when the receiving fax machine
Start
.
Speaker Phone
, then press the two-digit
Speed Dial
Speaker Phone
Start after entering the Speed Dial
when the receiving fax
Start
Speaker Phone
.
Speaker Phone
.
to release