Setting Volume Amplify; Setting The Speaker Volume - Brother FAX 355MC Owner's Manual

28
C H A P T E R F O U R

Setting Volume Amplify

Please carefully read "Setting the Handset Volume" before you do the
following steps:
1
Press , ,
Function
1
VOL AMPLIFY:OFF?
SELECT < - - > & SET
2
Press or
users are hearing-impaired and go to Step 4—OR—If some or all of the
users are hearing-impaired, select VOL AMPLIFY:ON?.
PERMANENT?
SELECT < - - > & SET
3
Press or
hearing-impaired—OR—Select TEMPORARY? if only some of the
users are hearing-impaired.
4
Press .
Set
5
Press to exit.
Stop

Setting the Speaker Volume

You can adjust the speaker volume when your fax machine is onhook (after
you pressed
Speaker Phone
Press or to adjust the volume level. The display shows the setting
you are choosing. Each key press changes the volume to the next setting.
The new setting will remain until you change it again.
You can adjust the speaker volume while you are listening to your OGM
(Outgoing Message) and ICMs (incoming messages).
If you turn the Incoming Recording Monitor to OFF (
Speaker for screening calls will be disabled and you will not be able to hear
callers leaving messages. The volume for other operations can still be
controlled using and
.
5
to select VOL AMPLIFY:OFF? if none of the
to select PERMANENT? if all the users are
), by selecting a speaker volume level.
.
, , ), the
Function
8 5