Table of Contents
Advertisement
Printing Received Faxes
Difficulty
Condensed print and white streaks
across the page or the top and
bottom of sentences are cut off.
Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the
Received color fax prints only in
black and white.
Left and Right margins are cut off or
a single page is printed on two
pages.
Phone Line or Connections
Difficulty
Dialing does not work. (No dial
tone)
The machine does not answer
when called.
Receiving Faxes
Difficulty
Cannot receive a fax
92
Suggestions
You probably had a bad connection, with static or interference on the telephone
line. Ask the other party to send the fax again.
problem is with the sending machine. Try receiving from another fax machine.
Replace the color ink cartridges that are empty or nearly empty, and then ask the
other person to send the color fax again. (See Replacing the ink
cartridges on page 102.)
Turn on Auto Reduction. (See Printing a reduced incoming fax on page 38.)
Suggestions
Check that the machine is plugged in and switched on.
Check all line cord connections.
(Canada only) Change Tone/Pulse setting. (See Quick Setup Guide.)
Send a fax manually and wait to hear fax receiving tone before pressing
Black Start or Color Start. (See Sending a fax manually on page 33.)
Make sure the machine is in the correct receiving mode for your setup. (See
Receive modes on page 34.) Check for a dial tone. If possible, call your machine
to hear it answer. If there is still no answer, check the telephone line cord
connection. If there is no ringing when you call your machine, ask your telephone
company to check the line.
Suggestions
Check all line cord connections.
Make sure the machine is in the correct receiving mode for your setup. (See
Receive modes on page 34.)
If you often have interference on the phone line, try changing the menu setting of
Compatibility to Basic or Normal. (See Phone line interference on page 101.)
Advertisement
Table of Contents
